武汉理工大学材料科学与工程学院研究生导师：刘凯

导师信息来源：武汉理工大学材料科学与工程学院 2019-07-23　相关院校：武汉理工大学

一、姓名：刘凯

二、基本情况：

1、出生年月：1987年2月

2、学位：博士

3、职称：副教授

4、工作院系：材料科学与工程学院

三、教育经历(从大学开始)：

2009/09 - 2014/06，华中科技大学，材料加工工程专业，博士

2005/09 - 2009/07，武汉理工大学，材料成型及控制工程专业，学士

四、工作经历：

2016/10 - 现在，武汉理工大学，材料科学与工程学院，副教授、硕士生导师

2014/07 - 2016/9，武汉理工大学，材料科学与工程学院，讲师

五、研究领域：

1、粉末材料激光选区烧结3D打印技术

2、粉床喷液3D打印技术

3、自由挤出3D打印技术

4、建材(陶瓷、水泥等)、航空航天、生物医疗、文化创意等领域3D打印应用技术

六、科研项目：

1、湖北省自然科学基金面上项目(2015CFB167)：复杂结构 SiC 陶瓷件增材制造技术基础研究，10万元，项目负责人，2015年-2017年。

2、中山市新型研发机构产业化项目(2016F2FC0021)：水泥基材料艺术品构件3D打印技术研发与应用，50万元，项目负责人，2016年-2018年。

3、企业委托项目(20141h0451)：SiC陶瓷3D打印技术研究，60万元，项目负责人，2014年-2016年。

4、材料成型与模具技术国家重点实验室开放基金(P2017-002)：复杂形状SiC陶瓷零件激光选区烧结/反应烧结复合成型关键技术研究，5万元，项目负责人，2017年-2019年。

5、国家科技重大专项(2013ZX02104001-002)：IC装备用高端陶瓷零部件的近净成型技术，697万元，主要技术负责人，2013年-2017年。

七、代表性论文及著作(不多于10项)：

1、Liu K, Sun H J, Shi Y S, et al.Research on selective laser sintering of Kaolin-epoxy resin ceramic powders combined with cold isostatic pressing and sintering Ceramics International. 2016, 42(9): 10711-10718. (SCI收录)

2、Liu K, Shi Y S, Li C H, et al. Indirect selective laser sintering of epoxy resin-Al2O3 ceramic powders combined with cold isostatic pressing[J]. Ceramics International. 2014, 40(5): 7099-7106. (SCI收录)

3、Liu K, Shi Y S, He W T, et al. Densification of alumina components via indirect selective laser sintering combined with isostatic pressing[J]. International Journal of Advanced Manufacturing Technology. 2013, 67:2511–2519. (SCI收录)

4、He W T, Liu K, Wei Q S, et al. Numerical simulation of cold isostatic pressed alumina parts produced by selective laser sintering and part shape optimization[J]. Ceramics International. 2013, 39: 9683–9690. (SCI收录

5、Song X H, Li W, He W T, Liu K, et al. Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications.International Journal of Advanced Manufacturing Technology. 2015,81：(1-4): 15-25. (SCI收录)

6、Wang ZJ，Shi YS，HeWT，Liu K, et al. Compound process of selective laser processed alumina parts densified by cold isostatic pressing and solid state sintering: Experiments, full process simulation and parameter optimization.Ceramics International. 2015, 41(2): 3245-3253. (SCI收录)

7、史玉升, 刘凯,李晨辉等. 氧化锆零件选择性激光烧结/冷等静压复合成形技术研究. 机械工程学报. 2014, 50(21): 118-123. (EI收录)

8、史玉升,刘凯, 贺文婷等. 选择性激光烧结/冷等静压复合制造高密度Al2O3异形陶瓷件的研究[J]. 应用激光.2013, 33:1-6

9、贺文婷, 魏青松, 刘凯等. 数值模拟在氧化铝陶瓷SLS/CIP过程中的应用[J]. 材料科学与工艺. 2014,22(4):56-60

10、刘文广, 史玉升, 刘凯等. 基于选择性激光烧结技术的艺术瓷成形方法研究. 陶瓷学报. 2014, 35(4): 425-428.

八、联系方式：

1、Tel：

2、E-mail：liukai19870222@163.com;victor_liu@whut.edu.cn

3、工作地址(实验室)：材料学院大楼516室

备注：欢迎积极主动、勤奋刻苦，对材料科学、加工成形、3D打印感兴趣的同学加入!

1.Name: Liu Kai

2.Brief introduction:

1)Date of birth: 02/1987

2)Degree:Ph.D

3)Title: Associate Professor

4)Working department: Manufacturing and Processing of Materials，School of MaterialsScience and Engineering.

3.Education experience(after entering university):

2009.9- 2014.6

Doctor of Material Processing Engineering,

School of Materiasl Science and Engineering,

Huazhong University of Science andTechnology.

2005.9-2009.7

Bachelor of Material Processing and Control Engineering,

School of Materials Science and Engineering,

Wuhan University of Technology.

4.Working experience:

2016.10- present Associate Professor of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology

2014.7- 2016.9 Lecturer of Material Processing Engineering, School of Material Science and Engineering, Wuhan University of Technology

5.Research field(no more than 3):

1) Powder based laser selective sintering technology

2) Powder based 3DP technology

3) Free extrusion 3D printing technology

4)3D printing application technology in building materials (ceramics, cement, etc.), aerospace, biomedical, cultural and creative fields

6.Research project(no more than 5):

1) Project of Natural Science Foundation of Hubei Province(2015CFB167):Basic research on the manufacturing technology of complex structure of SiC ceramic parts，100,000 RMB, Principle Investigator，2015-2017.

2) Enterprise project(20141h0451)：Research on 3D printing technology of SiC ceramics，600,000 RMB, Principle Investigator，2014-2016.

3) Open fund of Key Laboratory of refractory materials and metallurgy(G201609)：Basic research on key technology of high temperature SiCceramic selectivelasersintering of complex structure, 50,000 RMB, Principle Investigator，2016-2017.

4) Independent innovation research foundation of Wuhan University of Technology(2015IVA002)：Research on laser 3D printing ofsilicon carbide ceramic and its densification law，50,000 RMB, Principle Investigator，2015-2016.

5) Major national science and technology(2013ZX02104001-002)：Near net shaping technology of high-end ceramic parts for IC equipment，6970,000 RMB, Main Technical Person，2013-2017.

7.Representative papers and works(no more than 10):

1) Liu K, Shi Y S, Li C H, et al. Indirect selective laser sintering of epoxy resin-Al2O3 ceramic powders combined with cold isostatic pressing[J]. Ceramics International. 2014, 40(5): 7099-7106. (SCI)

2) Liu K, Shi Y S, He W T, et al. Densification of alumina components via indirect selective laser sintering combined with isostatic pressing[J]. International Journal of Advanced Manufacturing Technology. 2013, 67:2511–2519. (SCI)

3) He W T, Liu K, Wei Q S, et al. Numerical simulation of cold isostatic pressed alumina parts produced by selective laser sintering and part shape optimization[J]. Ceramics International. 2013, 39: 9683–9690. (SCI)

4) Song X H, Li W, He W T, Liu K, et al. Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications.International Journal of Advanced Manufacturing Technology. 2015,81：(1-4): 15-25. (SCI)

5) Wang ZJ，Shi YS，HeWT，Liu K, et al. Compound process of selective laser processed alumina parts densified by cold isostatic pressing and solid state sintering: Experiments, full process simulation and parameter optimization.Ceramics International. 2015, 41(2): 3245-3253. (SCI)

6) Shi Y S, Liu K, Li C H,et al. Study on compound forming technology of zirconia parts by selective laser sintering/cold isostatic pressing. Journal of Mechanical Engineering. 2014, 50(21): 118-123. (EI)

7) Shi Y S, Liu K,He W T,et al. Study on the high density of Al2O3ceramic parts fabricated by selective laser sintering/cold isostatic pressing.[J]. Applied laser.2013, 33:1-6

8) Chen Y X, Liu K, Wei Q S, et al. Simulation and verification for the densification process of alumina powder by Hot Isostatic Pressing, Powder metallurgytechnology.2013, 31:174-179.

9) He W T, Wei Q S, Liu K, et al. Numerical simulation for the process of alumina ceramic in Selective Laser Sintering/Cold Isostatic Pressing process[J]. Materials science and technology.2014,22(4):56-60.

10) Liu W G, Shi Y S, Liu K et al. Research on the forming of art ceramics based on selective laser sintering technology. Journal of ceramics. 2014, 35(4): 425-428.

8.Contact information:

1) Tel:

2) E-mail: liukai19870222@163.com;victor_liu@whut.edu.cn

3) Location of lab: Room 516 in School of Material Science and Engineering office building